3
1. To operate your fan in a horizontal plane push
the OSCILLATION PLUG H down and pull the
OSCILLATION PLUG V up.
2. To operate your fan in a vertical plane push
the OSCILLATION PLUG V down and pull the
OSCILLATION PLUG H up.
3. To activate the dual oscillation feature with the
fan oscillating horizontally and vertically make
sure both OSCILLATION PLUGS are pushed
down.
reMoTe CoNTrol HANDSeT
(See FiGUre 4)
Your REMOTE CONTROL HANDSET controls all of
the features that are part of the CONTROL PANEL.
This unit requires two (2) AAA batteries, 1.5V (not
included).
Battery replacement
a) Locate the battery cover on the back of the
remote control handset. Slide the battery cover
off with your thumb.
b) Remove old batteries from the remote control.
c) Insert two new batteries, pressing them firmly
into their slot.
d) Replace the battery cover.
NoTeS:
• Replace all batteries of a set at the same time.
• Being careful not to bend or damage the contact
spring, clean the battery contacts and devices’
contacts prior to installing the batteries.
• Remove the batteries from the equipment when it
is not being used for an extended period of time.
• Remove the used batteries promptly.
• Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable
batteries.
• Do not discard used batteries into household
trash containers. Contact your local government
for disposal or recycling practices in your area.
ADJUSTMeNT iNSTrUCTioNS
Height Adjustment: To adjust the height of your
fan loosen the HEIGHT ADJUSTMENT COLLAR
and adjust the fan to the desired height. Tighten the
HEIGHT ADJUSTMENT COLLAR to secure the fan
in the desired position.
Tilt Adjustment: To adjust the fan head angle
simply grasp the fan head with both hands and
adjust the fan head to the desired angle.
CleANiNG/
MAiNTeNANCe
iNSTrUCTioNS
Follow these instructions to correctly and safely care
for your fan. Please remember:
• Always unplug the fan before cleaning.
• Do not allow water to drip on or enter into fan
housing.
• Be sure to use a soft cloth moistened with a mild
soap solution.
• Do not use gasoline, thinner or benzene as a
cleaner.
Clean the fan grill, blade, housing and base with a
soft, damp cloth. Please use caution around the
motor housing area. Do not allow the motor or other
electrical components to be exposed to water.
FAN STorAGe
When storing your fan in the off season, it is
important to keep it in a safe dry location. It is
important to protect the fan head from dust.
WE STRONGLY RECOMMEND USING THE
ORIGINAL BOX FROM PURCHASE.
Fig. 4
