2
ASSeMBlY
iNSTrUCTioNS
(See FiGUre 1)
Estimated assembly time: 10-15 minutes
NoTe: MAKE SURE YOU REMOVE ALL CONTENTS
FROM THE PACKAGE. PLEASE CHECK
PACKAGING MATERIALS FOR PARTS THAT
COULD BE REQUIRED TO OPERATE YOUR FAN.
1. Insert the EXTENSION POLE into the top of the
BASE and secure with the L-SHAPED SCREW
and METAL BRACKET.
2. Remove the FAN BLADE CAP and REAR GRILL
MOUNTING NUT from the shaft of the MOTOR
HOUSING.
3. Place the REAR GRILL over the MOTOR
HOUSING and secure with the REAR GRILL
MOUNTING NUT. Make sure that the three tabs
on the MOTOR HOUSING are aligned with the
REAR GRILL.
4. Slide the FAN BLADE over the MOTOR SHAFT
and secure with the FAN BLADE CAP.
5 Expand the GRILL CLIPS located around the
perimeter of the FRONT GRILL and align the
FRONT GRILL over the REAR GRILL. Secure
the grills together by closing the GRILL CLIPS
over both grills.
NoTe: When aligning the grills together the
HANGING GRILL CLIP should be located at the
top of the grill.
6. Loosen the MOUNTING NUT located on the back
of the CONTROL PANEL and slide the fan head
assembly over the top of the EXTENSION POLE.
7.
Secure the CONTROL PANEL to the EXTENSION
POLE by tightening the MOUNTING NUT.
oPerATiNG
iNSTrUCTioNS
CoNTrol PANel
(See FiGUre 2)
Your fan comes with an electronic LED control
panel that will display the settings of the fan that
your choose. Make sure your fan is plugged into the
appropriate outlet.
1. Speed/On Button: allows you to turn the fan on
and cycle through high, medium, and low speed
settings.
2. Timer Button: allows you to set the duration of
time for your fan to run and automatically turn off.
3. Mode: allows you to set one of the three modes
of your fan.
a. Red LED: Breeze mode randomly cycles
through high, medium, and low speed settings
to create a natural breeze effect.
b. Green LED: Sleep mode reduces speeds in
half hour increments and will continue to run
on the low speed setting until the fan is turned
off manually or the timer expires.
c. Orange LED: A combination of breeze and
sleep modes where breeze intensity will
decrease gradually over half hour increments
until the fan is turned off manually or the timer
expires.
4. Off: allows you to turn the fan off.
oSCillATioN iNSTrUCTioNS
(See FiGUre 3)
Your fan comes with an innovative three dimensional
oscillation technology that allows for you to operate
the fan in the horizontal plane, vertical plane, or in
conjunction to oscillate up and down while moving from
side to side.
Fig. 2
1
1. Speed Setting
LEDs
2. Timer Setting
LEDs
3. Mode LED
4. Mode Button
5. Timer Button
6. Speed/On Button
7. Off Button
4
3
2
5
6
7
S. Oscillation Plug H
T. Oscillation Plug V
U. Motor Housing
Fig. 3
U
T
S
