Operation Manual for Oscillating Dry Bath Chapter IV Operation Guide
—
10
—
3. Single point set
Different from a file, a single point has only one
section. In the main interface, click "Single Point Set"
to enter the single point setting interface. The
operation is similar to that of the section information
editing interface, and the difference is that because it
has only one section, you can click "Run" to run
directly after the section information editing is done.
Click "Back" to return to the main interface.
4. Run
Click "Run" in the interface with a "Run"
button to enter the running interface. The running
interface displays the information of the running
section, including which section is currently
running, the current temperature, the remaining
constant-temperature time of the section, the
oscillation speed and mode.
Running Interface
Click "Pause" in the running interface, the run
time will be suspended and a prompt box will pop up.
Click "Continue" to continue the current section.
Click "Next" in the running interface to skip
the current section and go on to the next section. If the
current section is the last section, a “Stop Running”
prompt box will pop up. Click "Stop" to stop running
and a “Stop Running” prompt box will pop up. Select
"Yes" to stop running, or select "No" to return to the
current running section to continue running.
Stop Running
Pause Running