Operation Manual for Oscillating Dry Bath Chapter IV Operation Guide
—
5
—
Chapter IV Operation Guide
This chapter describes in detail the method of temperature setting, oscillation time setting and
oscillation speed setting of the oscillating dry bath, as well as how to correct the error between the actual
temperature and the display temperature, and the setting of the buzzer.
Assemble And Disassemble The Module
The module can be replaced according to requirements. To assemble the module, attach the module
chute to the host chute, then fix the module. To disassemble the module, press the module button, the
module will be set up and separated from the host.
Examination Before Startup
Please confirm the following content before plugging the plug into the power socket.
1 Whether the surface for placement of the instrument is horizontal and stable;
2 Whether the power supply is in line with the voltage required for the instrument; (refer to Chapter II
of this file for the power supply requirements)
3 Whether the power line plug has been securely plugged into the power outlet;
4 Whether the power line is reliably grounded;
5 Whether the module and the mainframe are securely fixed.
Warning!
If the display of the instrument is abnormal after startup, please turn off the power source
immediately and contact with the supplier.
Are you ready? Let's start!
Button
Chut