biodex 950-385, Application/Operation Manual

Page: 35 / 55

Your Biodex Gait Trainer 2 should provide trouble-free operation as long as the following
maintenance procedures are performed. Be sure to adhere to the hours of usage guidelines in the
chart below.
NOTE:
Without proper maintenance, excessive wear to drive components will occur. To assure trouble-free
operation, scheduled maintenance must be performed. Failure to adhere to the scheduled maintenance chart
below will void your warranty.
Instruction Hours of Usage
Lubricate Deck 75
Reverse Deck 1,000
Belt Replacement 1,000
Clean Motor and Amp 750
Front Roller Cleaning 375
DAILY MAINTENANCE
As required, clean all exterior surfaces, upholstery and restraining straps. Specialized vinyl clean-
ers or protectants are recommended for upholstery and cushions. Otherwise, use a solution of
warm water and mild detergent.
NOTE:
DO NOT use solutions containing ammonia.
Hardware computer components should be wiped clean as needed using a soft rag dampened
with alcohol.
QUARTERLY MAINTENANCE
Lubricate Treadbelt and Slider Deck
The Biodex Lubricant Kit is designed to reduce friction between the treadbelt and the slider deck.
It is required for all institutional treadmills. Proper and timely application of the lubricant will
prevent premature failures due to excessive wear and load. Items affected by inadequate lubrica-
tion are the treadbelt, slider deck, motor, and motor controller.
ANNUALLY OR EVERY 1,000 HOURS
Reverse Exact-Track Bed
Reverse the Exact-Track bed. The Gait Trainer bed is double-sided, allowing it to be reversed and
used over. Once both sides have been used, the bed must be replaced.
Replace Treadbelt
Inspect Treadmill for cracks or tears. If none are found, continue to use. If any cracks or tears are
apparent, replace treadbelt.
11. MAINTENANCE
— 11-1 — MAINTENANCE