IFU_MAL_US_V1.13_January 2021
P a g e
29 | 44
NOTE :
It is not necessary to pair your Mallya again when changing the pen (unless your system has
been reset -
see step 9.3. Reset instructions
).
8.2.3.
Moving Mallya to the same pen model or to a different pen model
8.2.3.1
Moving mallya to the same pen model
If you choose to move MALLYA to the same pen
model, select:
On the next injection, the injection
dose will be displayed in the
injection history as if no Mallya
transfer had taken place.
8.2.3.2
Moving mallya to a different pen model
If you choose to move MALLYA to a different pen
model, select:
In this case, the screens in
steps 4.4.3., 4.4.4.,
and 4.4.5.
are displayed. You have to select the
new pen model on which your Mallya is currently
assembled.
On the next injection, the injection
dose will be displayed in the
injection history with the new
model of pen (APIDRA in the
example above)
The same pen model, currently
assembled, is then displayed at the
top of the screen. (“LANTUS” in the
example)
The new pen model, currently
assembled, is then displayed at the
top of the screen. (“APIDRA” in the
example)