BioCare Medical intelliPATH FLX Manual Download

Page: 50 / 58

Pre-Start Checklist

21.

Use the

Pre-Start Checklist

to verify that the required buffer carboys have been filled, hazardous and non-

hazardous carboys have been emptied. Check all the carboy status categories in the

Waste Carboy Status

upon

confirmation.

22.

The

Delayed Run

checkbox on the top right side of the

PreStart Checklist

window allows the user to set a

delayed start time for the run.

22a.

Select the

Delayed Run

box.

22b.

Set the

Start Time.

22c

. The user also has the option to

Rinse Slides,

with DI Water, Buffer 1, or Buffer 2 and set the

Rinse

Buffer Interval

of 30 minutes, 1 hour, or 2 hours.

23.

Click

Prime Buffers

, located at the bottom right side of the screen, for first run of the day.

24.

The Pre-Start Checklist includes buttons to Estimate Run Time, Home Arm, Drain Waste, Prime Probe, and

Print Layout Maps (for slides and reagents).

25.

It is recommended that the user selects the

Rinse Slides before the Run

checkbox to ensure that the slides will

be solvated to allow the reagents to adequately spread across the slide.

Start the Run

26.

Start the run by clicking on

Start Staining

Note: If the Delayed Run box was selected in the Pre-Start Checklist screen, after clicking

Start Staining

the

Run Starts

countdown clock will appear at the bottom of the

Stainer Application

screen. The run automatically

begins after the countdown is completed. Alternatively, user may select

Start Now

Cancel Run

27.

While a run is in progress you may start a new Batch staining run or start a STAT staining run if slide tray E is

available.

Summary of Contents for intelliPATH FLX



























































Search results

Summary of Contents for intelliPATH FLX

Reviews:

Related manuals for intelliPATH FLX

Brands by name

Popular brands

BioCare Medical intelliPATH FLX, Manual

Search results

Summary of Contents for intelliPATH FLX

Reviews:

Related manuals for intelliPATH FLX

Brands by name

Popular brands