29
Amplification test on specified instrument (or nucleic acid extraction test on
specified nucleic acid extraction).
Caution
When the experiment is running
：
Please strictly follow the standard operating procedures and do not blindly or
continuously click.
It is forbidden to put materials unrelated to the experiment into the
instrument.
Please strictly follow the standard operating procedure.
Please pay attention to the instrument alarm prompt and deal with it in time.
6.6 Shut Down
Please follow the steps below to shut down:
1. Exit the software system, the instrument will automatically shut down the
computer and power off.
2. If the instrument is not used for a long time, press the main power switch
on the left side of the instrument to turn off the main power supply and disconnect
the power cord at the back of the instrument.
Caution
Users should read this manual carefully before use.
During the experiment, the safety door of the instrument must be closed.
Do not place reagents, samples, etc. that are not related to the experiment on
the workbench, so as not to affect the operation and cause pollution.
Operators must wear lab coats and disposable gloves according to laboratory
requirements to avoid that the splashing or overflow liquid contact with any
exposed parts of the body.
When the instrument will not be used for a long time, it should be shut down
and disconnected from the power supply.
All parts of the instrument may directly or indirectly come into contact with
the sample and must be treated as a potentially infectious agent.
If there is a malfunction in the operation of the instrument and cannot be
solved according to the description in this manual, please turn off the power
immediately, cut off the power, and do not turn on the instrument again, and
contact our as soon as possible.
6.7 Program Management Input Information
6.7.1 Project name input
Select [Add] in the program management interface, input the new project
name, and click [Save] to save the name. (Modify the parameter name by clicking
[Modify] on the original program.) As shown in figure 6-6-1.
