19
Table 4-2-9 Modular structure
No.
Name
Function
Notes
1
Tips carrier installation position
Install the tips carrier
2
Reagent carrier installation position
Install the reagent carrier
3
Deep well plate carrier installation
position
Install the deep well plate
carrier
4
PCR tubes carrier installation position
Install the PCR tubes
carrier
One carrier can be
optional each time.
5
Sample carrier installation position
Install the sample carrier
The red box indicates the limited site for each module
There are two guide rails on the bottom plate of the instrument, and the two guide
rails play a guiding and positioning role. As shown in Table 4-2-7, the installation site
of the carrier is introduced.
Carrier installation, as shown in Figure 4-2-8 below:
Figure 1 indicates the state of uninstalled carrier. During installation, install the
module in the corresponding site, and ensure that the protruding position of the
bottom of the module is installed in the guide rail on both sides, as shown in Figure 2.
There are 1-2 magnets at the back of each module. Ensure that magnets are installed
facing the inside of the instrument, as shown in Figure 3. Install to figure 4, and fully
attach to the rear end limited site. (For the installation of other carriers, refer to
reagent carrier installation).
