Getting Started
2-2
The FL600 and all computer hardware must be electrically grounded and
connected to a viable surge protector to avoid dangerous shocks and to
avoid destroying the electronic components through electrical spikes and
surges.
,QVWDOOLQJ.&DQG)/'LDJQRVWLF6RIWZDUH
The FL600 is supplied with two Windows™ software packages, KC4™
and FL600 Diagnostic Software.
KC4 controls the reader, reduces the fluorescence and absorbance data,
and furnishes the reports.
The FL600 Diagnostic software provides diagnostics to test the reader.
Although it contains other functions, these are undocumented and
unsupported.
,QVWDOOLQJ.&
Please consult your KC4™ User’s Guide. Place disk 1 into the floppy
drive. Run Setup.exe by choosing the Run option from the File Menu of
your Windows program. This routine will guide you through the
installation of KC4 onto your hard disk.
,QVWDODUGZDUH.H\
To use KC4 to control the reader and print data, the hardware key needs to
be installed on the parallel port of your computer. Please consult your
KC4 Operations manual for further instruction.
,QVWDOOLQJWKH)/'LDJQRVWLF6RIWZDUH
'LDJQRVWLFV8VH
To install the FL600 software, follow these steps:
Step 1:
Turn on your computer, start Windows, and activate Windows’
Program Manager, if necessary.
Step 2:
Insert the FL600 Setup diskette into the floppy drive.
Step 3:
Select
Run
from the Windows’
File
menu.
Step 4:
Type drive: setup, (i.e., b: setup).
