Page 22
Frequently Asked Questions
©2011 BioSmart Technologies
Q. What will the BioSmart Air Filtration system remove from the air?
The BioSmart® Air Filtration system in the BioSmart® Far Infrared Heater will kill
any biologically active contaminates that are present in the air including bacteria,
virus, mold and mildew.
Additionally, the most lethal contaminates in indoor air include the volatile
organic compounds that irritate the lung lining making an individual more
susceptible to the bacteria and virus that are in the air. Without removing these,
an air filtration system has only done half its job.
The BioSmart® Air Filtration system in the BioSmart® Far Infrared Heater contains
an interactive TIO2 panel that reacts with UV light inside the unit. The interaction
of these two components breaks down volatile organic compounds. The
ionization of these compounds assists the gas-absorption membrane in the filter
cartridge to absorb these contaminates as they are broken down by the TIOS and
the Ultraviolet light.
Once absorbed, these contaminates are held in the filter cartridge which should
be replaced at the beginning of each winter season before first-use of the heater.
To re-order a new gas-absorption filter cartridge, refer to the back of the Owner's
Manual for further directions.
Q. How long will the BioSmart® gas filtration cartridge last?
Usually about one winter heating season.
Q. Can I use multiple heaters in an area?
Depending on the size of the area, you may wish to use multiple heaters. Many
heaters may be used. Your heater is rated at 12.5 amps so each heater must plug
into an independent 15 amp, or greater, circuit.
Q. How does the BioSmart® Far Infrared Heater save me money?
The patented quartz heating elements in the BioSmart produce infrared heat
waves which heat objects in the room quicker than conventional radiant heat
waves. Using this type of heat can save up to 50% on your heating bill.
