Page 18
Detailed Operating Instructions
Setting the Timer
This feature allows you to set a future time for the heater to turn itself on. For
example, if you set the time for 1 hour, the heater will turn on in 1 hour.
1. Turn the power off (heater must be powered off to use the timer feature).
2. Press the TIME button on the Control Panel—the temperature setting that
the heater will turn on at will appear. Press the TIME button again, the two
zeros to the right will flash (:00), indicating 0 minutes have been set, and
the DELAY START indicator will illuminate.
3. Press the UP or DOWN button to select desired number of minutes (up to
59 minutes) that you would like the heater to wait to turn itself on.
4. Press the ENTER button—the two zero buttons to the left will flash (00:),
indicating 0 hours have been set.
5. Press the UP or DOWN button to the desired number of hours (up to 24
hours), and then press the ENTER button.
6. DELAY START indicator will flash until the unit comes on after waiting the
period of time you have set.
7.
To cancel the timer, press the power button and the timer will stop.
LED Display and Control Panel for Setting the Timer
©2011 BioSmart Technologies
