Customer/Warranty Service: 800-595-9605
Page 11
1. FIRST, inspect the package for any obvious damage.
2. Unpack the heater: cut open taped box edges, fold back box flaps. Gently turn
entire box upside down; lift box from protective packaging.
3. Remove the protective packaging materials and turn upright; find a level and
unobstructed location to place the unpackaged heater. (
NOTE: We recommend
keeping the packaging for off-season storage and any transportation in the
unlikely event that servicing is required
.)
4. Plug the power cord directly into an unused, grounded 120 volt, 15 amp or
higher circuit receptacle.
5. Press the POWER button, located on the control panel. The heater‖s temperature
setting will show
72° F
on the display. (
NOTE: To switch between Celsius and
Fahrenheit, press the DOWN & ENTER buttons simultaneously and hold for
about 3 seconds. The display will convert automatically
.)
Unpacking Your New
BioSmart®
Heater
Heater Care & Storage
General Maintenance and Cabinet Care
Clean the filter often to provide for maximum performance. When necessary, wipe the cabinet
clean with a soft damp cloth and/or furniture polish.
Heater Storage
When the heater is not being used for an extended period of time, observe the following steps to
preserve the life and performance of the unit:
Unplug heater (Do not unplug heater while heater is running. Please see Operating
Instructions - Turning Power Off.) - this will also help you conserve energy in your home or
office.
Gently wrap the power cord into the cord storage compartment in the back of your heater.
This will help prevent undue wear and tear on the cord.
Cover the heater to prevent dust from accumulating on or in heater.
Store heater in a dry, low dust environment.
NOTE: Before resuming use of heater, ensure the filter and front grill are clean and clear of all
dust and dirt. Also, observe the entire length of the power cord to ensure no damage has
compromised the integrity of the cord.
