BINZEL-ABICOR BRS-CC, Operating Instructions Manual

Page: 27 / 84

BRS-CC 3 Scope of delivery
EN - 6
3 Scope of delivery
Order the equipment parts and wear parts separately. Order data and part numbers for the equipment parts
and wear parts can be found in the current
ABICOR BINZEL
spare parts and wear parts lists.
The contact for consulting and ordering can be found in the Internet at
www.binzel-abicor.com
.
3.1 Transport
The components are carefully checked and packaged, however damage may occur during shipping.
3.2 Storage
Physical storage conditions in a closed room:

Tab. 2 Temperature on page EN-3
4 Functional Description
For cleaning, the torch is clamped with the cylindrical part of the gas nozzle in the clamping device. The
milling cutter which is configured to the gas nozzle and torch geometry moves into the gas nozzle interior
by means of compressed air and removes adhering welding spatter there. The cleaning process is optimized
by an air-blast function (option) through the cable assembly.
Afterwards, the cleaned gas nozzle interior is sprayed by the milling cutter with a dosed quantity of anti-
spatter fluid against adhesion of spatter. In the wire cutting device (DAV), the welding wire is cut to TCP
length. A clamp for strain relief of the connection between control system and cleaning unit is integrated in
the housing.
• Completely mounted maintenance station BRS-CC • Connection kit with non-return valve
• Anti-spatter fluid (1 litre bottle) • Empty bottle
• 1 distance sleeve for gas nozzles with nominal diameter up
to 15.5
• 1 distance sleeve for gas nozzles with nominal diameters from
16 to 19
• Operating instructions
Tab. 11
Scope of delivery
NOTE
A clamping prism and a milling cutter are required for the first equipment and the functionality of the
maintenance station. They depend on the torch and gas nozzle geometry.
Checking procedure on receipt of
goods
Make sure that the shipment is complete by referring to the delivery note!
In case of damage
Check the package and components for damage (visual inspection)!
In case of complaints
If the goods have been damaged during transport, contact the last carrier immediately!
Keep the packaging for possible checks by the carrier.
Packaging for returning the goods
Use the original packaging and the original packaging material. If you have questions
concerning the packaging and safety during shipment, please consult your supplier.
Tab. 12
Transport