bintec elmeg elmeg IP640, User Manual

Page: 17 / 62

elmeg IP640 / en / elmeg IP640 / telephony.fm / 4/1/19
Te
mplate bin
tec-
e
lmeg
, V
e
rsion
1, 01.07
.2014
16
elmeg IP640
bintec elmeg Making calls
Making calls
Making a call
¤
Enter the number Lift the handset
or
¤
lift the handset Enter the number DIAL
Use + as a prefix for calls abroad: Press and hold key
Calls are initiated via the standard send connection if you do not select another option. To use
another VoIP connection:
¤
SELECT LINE select required connection Enter the number DIAL
When entering the call number:
Incoming call during number entry:
The phone is connected to the LAN.
At least one VoIP connection has been set up and assigned to the telephone.
VoIP connections are set up by the administrator with the Web configurator or
assigned using a PABX.
Up to six VoIP connections (call numbers) can be assigned to the phone. The first con-
nection to be set up is the standard send connection. The name of the standard send
connection is displayed in idle mode in the top left in the status bar (
page 9 ).
No connection available: the following icon is shown in the display
Information about the telephone connections and the standard send connection:
Web configurator
page 52
Using the speaker to make calls:
¤
Enter the number Press the handsfree key
Using the headset to make calls:
¤
Enter the number Press the headset key
You can switch over at any time during the conversation.
In the following instructions, the icon also always stands for or .
Deleting incorrectly entered numbers to the left of the cursor:
¤
Cancel dialling:
¤
END
Accept the call:
¤
ACCEPT
Reject the call:
¤
REJECT