bintec elmeg elmeg IP640, User Manual

Page: 40 / 62

elmeg IP640 / en / elmeg IP640 / settings.fm / 4/1/19
Te
mplate bin
tec-
e
lmeg
, V
e
rsion
1, 01.07
.2014
39
elmeg IP640
bintec elmeg Basic settings
VLAN
A local network can be divided into logical subnetworks known as VLANs (VLAN = Virtual Local
Area Network). VLANs are used for example to separate the data traffic of different services
(Internet telephony, Internet TV, etc.) and to define different priorities for the data traffic.
Show the phone’s VLAN settings.
¤
Settings VLAN
Restarting the phone
You can restart the device if required. All settings are retained.
¤
Settings Reboot Confirm the prompt with Reboot now
Resetting the device to the factory settings
A reset returns all the settings to the default settings. Network configuration, VoIP connections,
directories, call lists and all the individual settings are deleted or restored to the factory settings.
¤
Settings Reset Confirm the prompt with Reset now Enter the
password OK
Resetting using the device keys
¤
Disconnect the phone from the power Press the Control key With the key still
pressed, reconnect the phone to the power Release the key after about 10 seconds
VLAN Tagging : No , LAN or LAN and PC (when a PC is connected to the phone,
page 6 )
For VLAN tagging LAN :
VLAN Identifier (LAN) : ID of the virtual network to which the phone belongs.
LAN Priority (LAN) : Priority of the virtual network to which the phone belongs.
Additional parameters for VLAN tagging LAN and PC :
VLAN Identifier (PC): ID of the virtual network for the PC.
LAN Priority (PC): Priority of the virtual network for the PC.
Changes to these settings can only be made by the administrator.
The function can only be run by the administrator.
You can back up your personal settings before a reset: page 51