bintec elmeg elmeg IP640, User Manual

Page: 25 / 62

elmeg IP640 / en / elmeg IP640 / telephony.fm / 4/1/19
Te
mplate bin
tec-
e
lmeg
, V
e
rsion
1, 01.07
.2014
24
elmeg IP640
bintec elmeg Making calls
Transferring a call
Forwarding a call to another external participant during the call:
¤
BLIND TRANSFER enter the number with the keypad or select from the directory
TRANSFER replace the handset
Connecting both external participants to one another during call swapping or in an external
consultation call:
¤
select the call on hold TRANSFER . . . the call on hold is transferred to the consultation
party.
If the active participant does not accept the call, a recall will be initiated by the participant on
hold.
Call divert
Incoming calls are diverted to another line or a network mailbox. For every phone connection,
you can set up call diverts for
Activating call divert
¤
From the start screen, tap CALL DIVERT
or
¤
Select Services Call Divert Select a connection
¤
Select when call forwarding is to apply:
All Calls / When Busy / No reply
¤
Select where the call is to be forwarded:
To a phone number:
¤
Phone Number Tap the bottom of the entry field Enter the number Save
Back
To the answering machine:
¤
Voice Mail Save Back . . . calls are forwarded to the answering machine assigned
to the connection
For call forwarding of type All Calls , the display shows in idle mode Call Divert as well as the
connection and forwarding destination.
All Calls Calls are diverted immediately
When Busy Calls are diverted if the line is busy
No reply Calls are diverted if no one picks up after several rings
Call forwarding of type No reply becomes active after 120 seconds as standard.
You can change the delay time from the Web configurator ( page 43 ).