bintec elmeg elmeg IP640, User Manual

Page: 44 / 62

elmeg IP640 / en / elmeg IP640 / web_configurator.fm / 4/1/19
Te
mplate bin
tec-
e
lmeg
, V
e
rsion
1, 01.07
.2014
43
elmeg IP640
bintec elmeg Configuring other settings with the Web configurator
Telephony
Changing the standard send connection
If the telephone has more than one VoIP connection, outgoing calls are initiated via the stand-
ard send connection (
page 16 ).
Changing the standard send connection:
¤
Settings Telephony Connections
All the configured connections are shown. The check box under Default send Connection
shows which connection is currently selected.
¤
Check the connection required Set
Only active connections can be selected.
Settings for Call Waiting
Specify the telephone's response when another call comes in during a call.
¤
Settings Telephony Call Settings
For each connection:
Prevent/permit Call Waiting:
¤
Select the option under Display Waiting Call ( = Call Waiting permitted) /
deselect ( = Call Waiting not permitted)
Permit Call Waiting:
¤
Select Acoustic signal from the list
Off : the incoming call is shown in the display only
or signalling with a Call Waiting tone (beep): once or every 4, 10, or 20 seconds
Save the settings: Set
Setting up Call Divert
Forwarding incoming calls to another number or a network mailbox.
¤
Settings Telephony Call Divert
For each connection ( Incoming line ):
The provider/the PABX supports this function.
All Calls Forward all incoming calls.
When Busy Forward incoming calls when the line is busy.
No Answer Forward incoming calls after a defined period if they are not accepted.