GWR-2000 Four-wire 4-20 mA/HART
925-0335 Rev B
64
11 Supplement
Fig. 36: Measuring ranges - GWR-2000
1 Reference plane
2 Probe length L
3 Measuring range
4 Upper dead band (see following diagrams - grey section)
5 Lower dead band (see following diagrams - grey section)
Typical deviation
4)
See
following
diagrams
Fig. 37: Deviation GWR-2000 in rod version
1 Dead band - no measurement possible in this area
L Probe length
4)
Depending on the installation conditions, deviations can occur which can be rectified by adapting
the adjustment or changing the measured value offset in the DTM service mode
