GWR-2000 Four-wire 4-20 mA/HART
925-0335 Rev B
6 Set up with the display and adjustment module
32
In the "
Lock/unlock adjustment
" menu item, you can protect the sensor parameters against un-
authorized or inadvertent modification. The PIN is activated/deactivated permanently.
With active PIN, only the following adjustment functions are possible without entering a PIN:
●
Select menu items and show data
●
Read data from the sensor into the display and adjustment module.
Caution:
With active PIN, adjustment via PACTware/DTM as well as other systems is also blocked.
You can change the PIN number under "
Additional settings - PIN
".
If a supplementary electronics with an additional current output is installed in the instrument, you
can adjust the additional current output separately.
In the "
Current output 2
" menu item you specify which measured value the additional current
output refers to.
The procedure corresponds to the previous settings of the standard current output. See "
Setup -
Current output
".
In the main menu point "
Display
", the individual submenu points should be selected subse-
quently and provided with the correct parameters to ensure the optimum adjustment of the dis-
play options. The procedure is described in the following.
The following submenu points are available:
The submenu points described below.
The "
Menu language
" menu item enables the setting of the requested national language.
In the delivery status, the sensor is set to the ordered national language.
In the "
Indication value 1
" menu item, you define the indication of the measured value on the
display. You can display two different measured values. In this menu item, you define measured
value 1.
The default setting for the displayed value 1 is "
Filling height Level
".
