BARRIER BOX
REMOTE COLOR
CHANGE BOX
EN
77-3095-R1.0 (8/2015)
3 / 8
Remote Color Change Box
The remote color change box is used with the GEMS system for in-booth control of flushes, color changes,
and alarm resets.
For proper operation of this accessory the GEMS system requires a Zener barrier wired in series with the
electrical component used in the hazardous area. The barrier is installed in a box attached to the back of
the GEMS control enclosure. The box can accept up to three barriers for in-booth capability of:
• Remote color change box
• Paint flow meter (on GEMS fluid panel)
• Solvent flow meter (on GEMS fluid panel)
This manual describes the installation of the barrier box and remote color change box. For information on
installation of the barriers for in-booth use of the flow meters, see manual 77-3094: Zener Barrier Box
Installation
.
240-3053-1 Package Contents:
• Remote color change box with 50’ [15m] cable
• NEMA 4 barrier box with mounting hardware
• Zener barrier with associated wiring
Note this part number does not include a barrier for in-booth operation of the paint flow meter. To order a
package for in-booth color change and fluid panel capability, order part # 240-3053-2
.
