Rotary Switch
Push Button
Pneumatic Indicator
EN
77-3095-R1.0 (8/2015)
7 / 8
Remote Color Change Operating Instructions
LOADING OR CHANGING A COLOR:
When a color change or load is required, shut off atomizing air to
the spray gun. Turn the rotary switch to the desired color number, and press the push button for 5 seconds
until the flushing and / or loading process begins. Trigger the gun into a grounded metal waste container.
Flow will stop when the paint is loaded and ready to spray. Engage atomizing air to begin spraying.
ALARMS:
The pneumatic indicator will show when the unit is in alarm mode. To silence and reset the
alarm, press the push button. If the alarm repeats, the operator should return to the GEMS control and
resolve the alarm at the touch screen.
USING WITH FLUSH BOXES: Place the gun in the flush box and close the lid completely before starting
a color change or load.
The remote color change box is designed to only be used with single gun systems.
It cannot be used with two spray guns.
NOTE
