Binder ULTRA.Guard UF V 500, Operating Manual, Page: 70 / 117

UF V (E3) 09/2018 Page 70/116
16.2 Opening the chamber door with the access code
Once at least one access code has been assigned, it is required to open the chamber door.
Enter the four digits of the access code directly on the NumPad. Enter the digits quickly one after the oth-
er. If the input is too slow (> 5 seconds pause), the display changes again to the input of the first digit
Normal display during the entry of an access code
(four digits entered)
****
After the access code has been entered completely and correctly, a confirmation will appear on the con-
troller display:
Normal display following the entry of a valid access code
(example: code no. 3).
Code 3 valid
The door can now be opened within 5 seconds with the push-button “OPEN”.
If you wait too long after entering the code (> 5 seconds pause), it is required to enter the code again.
The entry of the correct access code is noted in the event list: “Access code 3 valid”.
If an invalid number combination has been entered, a corresponding message appears
Normal display after incorrect entry of the access code
Wrong code
The entry attempt is noted in the event list: “Access code invalid”.
Enter a valid access code.
If you press the “OPEN” pushbutton without having entered the access code, a prompt to enter an access
code appears briefly on the controller display:
Normal display with prompt to enter an access code
Enter code