TM 01 01/2009
page 19/27
Never try to open the device in order to repair it. In case of problems please contact BINDER service at
one of the indicated service addresses (chap. 8.3).
CAUTION
Danger of corrosion.
Damage to the unit.
∅
Do NOT use acidic or chlorine cleaning detergents.
We recommend using the neutral cleaning agent Art. No. Art. Nr. 1002-0016 for a thorough
and mild cleaning.
Any corrosive damage that may arise following use of other cleaning agents is excluded from
liability by BINDER GmbH.
8.2
Cleaning and decontaminating the sensor
Before and after each measurement, hygienically clean and disinfect the sensor.
Cleaning
Disconnect the chamber from the power supply before cleaning. Disconnect the power plug.
You can immerge the sensor tip into immerging into non-corrosive liquids. Cleaning can be performed
with pure water. In addition, you can use non-corrosive, acid-free household cleaning agents free from
acid or halogenides. We recommend using the neutral cleaning agent Art. No. 1002-0016.
Decontamination
Disconnect the chamber from the power supply before decontamination. Disconnect the power plug.
You can use the following disinfectants for spray disinfecting: Standard commercial non-corrosive surface
disinfectants free from acid or halogenides, alcoholic solutions. We recommend using disinfectant Art.
No. 1002-0022.
With every decontamination method, always ensure adequate personal safety.
8.3
Repair and calibration service
DANGER
Electrical hazard.
Danger of death.
∅
The unit must NOT become wet during operation or maintenance works.
¾
Disconnect the unit before conducting maintenance work. Disconnect the power plug.
¾
Ensure all maintenance work is conducted by licensed electricians or experts
authorized by BINDER.
Guarantee / repair and maintenance tasks must only be performed by persons or workshops
that have been authorized by BINDER. Otherwise, BINDER will perform the tasks itself. If
you do not know whom to contact in the event of a fault, contact us and we will advise you of
the nearest authorized workshop.
