Binder KBF-S 240, Operating Manual

Page: 36 / 89

KBF-S (E6) 08/2018 page 36/88
Example:
Desired temperature value: 40 °C, desired safety controller value: 45 °C.
Possible settings for this example:
Temperature set point Safety controller mode Safety controller value
40 °C
Limit Limit value 45 °C
Offset Offset value 5 °C
10.2.1 Setting the safety controller mode
Required access level: “User”.
Path: Normal display Setpoints Safety controller Mode
Press the OK button to enable the setting.
Setting the safety controller mode
The current setting flashes. Use the arrow buttons to select between
LIMI (Limit) and OFFS (Offset).
Confirm the setting with the OK button .
Mode
With the arrow-down button you proceed to setting the safety controller value (chap. 10.2.2)
With the Back button you can go back to the “ Safety controller ” submenu and, repeatedly pressing it, to
Normal display .
10.2.2 Setting the safety controller value
Required access level: “User”.
The desired safety controller mode must be selected first (chap. 10.2.1). Depending on the mode setting,
one of the following setting menus will appear.
Path: Normal display Setpoints Safety controller Limit or Offset
Press the OK button to enable the setting.
Setting the safety controller value with “Limit” safety controller mode.
The current value flashes. Enter the desired limit value with the arrow
buttons .
Confirm the entry with the OK button .
Limit
or
Setting the safety controller value with “Offset” safety controller mode.
The current value flashes. Enter the desired offset value with the ar-
row buttons .
Confirm the entry with the OK button .
Offset