Binder 9020-0423, Operating Manual

Page: 33 / 85

KB ECO / KB ECO-UL (E6.2) 12/2021 Page 33/85
9. Special controller functions – Idle mode
Required access level: “User”.
Path: Normal display Setpoints Functions on/off
You can define the switching state of up to four controller functions .
Function 2 “Idle mode” serves to deactivate all chamber functions except the controller. With operating
mode “Idle mode”, heating, refrigeration, and the fan are deactivated.
With this chamber type the other controller functions are without function.
The functions are displayed from left to right.
Example: Function 2 “Idle mode” activated = 0 1 00. Function 2 “Idle mode” deactivated = 0 0 00.
Submenu “
Functions on/off
”.
This view shows the switching states of the four available functions.
“1” = Activated function
“0” = Deactivated function
Idle mode
Press the
OK button
to access the first individual function. Then press the
arrow-down button
, to access
the “Idle mode” function. This ist he only adjustable function with the present chamber type.
Function 2 “Idle mode”.
The current switching state is shown (example).
Idle mode
Press the
OK button
to enable the setting.
Setting function 2 “Idle mode”.
The current setting flashes. Use the
arrow buttons to select between
0 (deactivated function) and 1 (activated function).
Confirm the setting with the
OK button .
Idle mode
With the Back button you can go back to the “
Functions on/off
” submenu and, repeatedly pressing it, to
Normal display .
In Normal display the activated functions are indicated by an icon showing the number of the respective
function. The “Info” icon flashes slowly. While it is lit, the lower text informs about the activated functions.
Example:
Normal display with activated
function 2 “Idle mode”.
Temperature Idle mode