Binder 9020-0423, Operating Manual

Page: 56 / 85

KB ECO / KB ECO-UL (E6.2) 12/2021 Page 56/85
Display showing the running self-test in Normal display
(example values)
Self-test active
Do not open and do not turn off the chamber while self-test is running.
After an interruption of the voltage supply, the self-test restarts.
If desired, you can cancel an ongoing self-test by deactivating the self-test function in the controller menu
(chap. 19.2).
When the complete self-test has finished, the message “Self-test completed” appears. The setpoint values
become active again
Display showing the completed self-test in Normal display
(example values)
Self-test completed
To delete the alarm message then deactivate the self-test function (chap. 19.2).
19.2 Deactivating the self-test mode
You can deactivate the self-test mode via the controller menu:
• cancel the running self-test prematurely
•
to delete the alarm message after completing the entire self-test
The procedure is similar to activating the self-test function.
Required access level: “Admin”.
Path:
Normal display Settings Various Self-test
Press the OK button to enable the settings.
Configuring the self-test function
The current setting flashes. To deactivate the self-test function, select
the setting “0” with the Arrow buttons .
Confirm the setting with the OK button .
Self-test
Press the
Back button
several times to go back to Normal display .