Binder 9020-0423, Operating Manual

Page: 54 / 85

KB ECO / KB ECO-UL (E6.2) 12/2021 Page 54/85
18.3 Export functions
Required access level: any user
Function “Export configuration”.
To write the configuration data from the controller to the USB stick,
press the
OK button
.
Export configuration
With the arrow-down button you can now change to the next function.
Function “Export recorder data”.
To write the recorder data from the controller to the USB stick, press the
OK button .
Export recorder data
With the
arrow-down button
you can now change to the next function.
Function “Export service data”.
To write the chamber data from the controller to the USB stick, press the
OK button .
Export service data
18.4 Ongoing data transfer
A moving arrow symbol indicates the progress of the data transfer.
Example:
Data recording is running.
Export service data
Attention! Danger of data loss! Do not disconnect the USB stick from the device during ongoing data trans-
fer!
After successful transfer, the controller shows again the initial function “Import configuration”.
18.5 Error during data transmission
In the event of an error, the message ERR (error) is displayed.
Read error (example).
Import configuration.