INT
(Intercom) button
Press and hold for 2 seconds to
make an intercom call (if you
have more than one handset).
Where to find it
CHARGE light
This comes on when the handset'¡¯s
batteries are being charged.
PHONE
Press to begin or answer a phone call.
Press during a call to switch the
speakerphone on and off.
(Note: the speakerphone won’ t work
if the batteries ar e low .)
Left and right Soft
buttons
Press to select the functions shown
above them on the display (for
example,
If the display is blank
Press the
button to switch the handset on
Display
For details of how to change the
screen background, refer to the
functions in the
section headed ‘Quick reference
guide to the menus’.
Before you can use the handset to make calls you will need to fit
and fully charge the batteries, as described on pages 5to 6.
HANDSET LOCATOR button
Press to make all registered handsets
ring (useful if you've forgotten
where you put a handset).
R (Recall)
button
#
Press and hold this button for a Recall signal.
IN USE light
Arrow
buttons
Press
or
Press to navigate through the menu on the
display.
Press in idle mode for short-cut functions
during a call to adjust the
volume in the earpiece.
to go straight to the
menu.
SMS text
messages
to go straight to a list of
(CID) records.
Caller
Display
HANG UP
/C/
button
Press to end a call.
Press while using menus to cancel and
return to idle mode.
Press and hold for 2 seconds to turn
the handset on and off.
Short cuts
To subscribe to network features like Caller Display and Call Waiting,
simply call your network service provider (the company which
supplies your telephone line). You don’t need to do anything special
on your Symphony 2600 phone to set these features up.
to go straight to a list of
records.
redial
).
Menu
Back
or
button
Wallpaper
button
Handfree
CID
connection to the telephone line.
Flashes when you have a
Flashes when you have message(s).
CID
