Quick reference guide to the menus
http://www.binatoneonline.com/
44
Base Default
Register
See page 28 to 29.
Modify PIN
To change the base unit’s PIN code
. The default PIN is
0000,
■
key in the current PIN then select
OK.
SOS Numbers
To set up to three numbers which
override
, so calls to them are always possible.
you can change it to any other four-digit number:
Old Pin:
■
key in the
OK.
New Pin:
new PIN then select
■
key in the
OK.
new PIN again then select
Confirm:
these
To return all base settings to their defaults
. If you
select this,
prompted
and you can select
or
.
Confirm?
Ok
Back
it need to enter PIN(default 0000), you'll be
call barring
You won’t need this unless you’re using your Symphony
Flash time
signal
leave it at the default setting of
different Recall setting.
short unless your PBX
To change the length of the Recall
requires a
First Ring
For SMS subscriber, it is recommended to
For non-SMS subscriber, it is recommended to
ON
program ;
OFF
program .
select this,
prompted
and you can select
Confirm?
it need to enter PIN(default 0000),
If you
or
.
Ok
Back
you'll be
2600 on a PBX.
