Binatone FP-705, Instruction Manual

Page: 6 / 42

6 66 66
Shredders and slicers (11,12,13,14)
1. Double-sided tip for thick slicing (11) (11) (11) (11) (11) is applied for slicing
products in thick circles and for thick shredding (13) (13) (13) (13) (13) - for
coarse shredding as well as for grating products in thick strips.
2. Double-sided tip for thin slicing (12) (12) (12) (12) (12) is applied for slicing
products in thin circles, for thin shredding - for fine shredding as
well as for grating products in thin strips.
3. Place the adapter (6) (6)
(6) (6)
(6) into the bowl on the rod (5). (5).
(5). (5).
(5). Select one
of the available replaceable tips (11-14) (11-14)
(11-14) (11-14)
(11-14) which you would
like to use, and put it into the cover for attachments (10) (10) (10) (10) (10) by
pressing the side section of the tip. Place the cover (10) (10) (10) (10) (10) in the
adaptor (6) (6) (6) (6) (6) in the bowl (5). (5). (5). (5). (5).
Note: put the selected tip (11–14) with the cutting part
upward.
4. Put the lid (4) (4)
(4) (4)
(4) on the bowl (5). (5).
(5). (5).
(5). Fix the lid (4) (4)
(4) (4)
(4) by turning it
clockwise until the click. If you install the bowl (5) (5) (5) (5) (5) or the lid (4) (4) (4) (4) (4)
improperly, the appliance won’t work.
5. Press the release (b) (b) (b) (b) (b) button and attach the casing (2) (2) (2) (2) (2) to the
lid (4) (4) (4) (4) (4) by inserting its rear end into the handle of the bowl
(5) (5) (5) (5) (5) first. Then lower the front part of the casing (2) (2) (2) (2) (2) onto the
lid until the click. Place the pusher
(3) (3)
(3) (3) (3) in the feeding tube of
the lid
(4). (4).
(4). (4). (4).
6. Load products through a special opening. Use the pusher (3) (3)
(3) (3)
(3) to
push ingredients slowly and steadily.
7. After completion of the work, switch to «0» to switch the appli-
ance off, and unplug the power cord from the power grid.
8. Use mode «1–5» for grating and slicing solid product. Use
mode «Turbo» for soft products.
9. Large products should preliminary be cut into smaller pieces, so
that they could easily pass through the food loading opening.
Attention: be extremely careful while inserting the cover
with the attachments (10) and chopper (7) in the
adapter (6) . The knife blades are very sharp! Be
extremely careful while removing the attachments.
Emulsifier (9)
1. This attachment is used for making mayonnaise, to whip light
cream and whisk egg whites.
2. Place the adapter (6) (6) (6) (6) (6) into the bowl on the rod (5) (5) (5) (5) (5) and fix the
emulsifier (9) (9) (9) (9) (9) in the adapter (6). (6). (6). (6). (6).
3. Make sure the attachment (9) (9) (9) (9) (9) is installed properly.
4. Load the necessary ingredients into the bowl (5). (5). (5). (5). (5).
5. Put the lid
(4) (4)
(4) (4) (4) on the bowl
(5). (5).
(5). (5). (5). Fix the lid
(4) (4)
(4) (4) (4) by turning it
clockwise until the click. If you install the bowl
(5) (5)
(5) (5) (5) or the lid
(4) (4)
(4) (4) (4)
improperly, the appliance won’t work.
6. Press the release (b) (b) (b) (b) (b) button and attach the casing (2) (2) (2) (2) (2) to the
lid (4) (4) (4) (4) (4) by inserting its rear end into the handle of the bowl
(5) (5) (5) (5) (5) first. Then lower the front part of the casing (2) (2) (2) (2) (2) onto the
lid until the click. Place the pusher (3) (3) (3) (3) (3) in the feeding tube of
the lid (4). (4). (4). (4). (4).
7. Switch on the appliance by switching to mode “1-5”
(a). (a).
(a). (a). (a).