Troubleshooting
!
The MD 1600 must be serviced by trained engineers.
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
ALWAYS check
first that:
◆
you have followed the steps listed on pages to to
install and set up your MD 1600
◆
all connectors are firmly inserted in their sockets
◆
mains power is switched on at the socket
◆
the handset’s batteries are correctly and securely
installed, and are not run down
Everyday use
“I cannot make
or answer calls.”
Check that the base unit’s
mains power
adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the
telephone line cable
that
was supplied with your MD 1600. Other telephone line
cables might not work.
Move the handset
closer
to the base unit.
Check the
Battery Level
symbol on the display. If it is
low, replace the handset on the base unit or charger
pod to recharge the batteries.
Switch off power
at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
If you still can’t make calls, try
re-registering
the
handset, as described on page 34.
40
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:22:16
Color profile: Generic CMYK printer profile
Composite Default screen
