Binatone DP270, Instruction Manual

Page: 2 / 52

CHARGE/IN USE lights
The CHARGE light comes on when the
handset’s batteries are being charged.
The IN USE light comes on when you
have a connection to the telephone line.
Where to find it
INTERCOM button
Press to make an intercom
call (if you have more than
one handset).
SPEAKERPHONE button
Press to turn the speakerphone
on and off.
RECALL button
You will need the Recall function
if your phone is connected to a
PBX, or if you use BT’s
Select Services.
UP and DOWN buttons
Press to display the last 10 numbers
you dialled.
Press during programming to move
through the menus.
Press during a call to change the
volume in the earpiece.
C (CLEAR) button
Press during programming to go
back to the previous option, or
to clear digits from the display.
Press during a call to mute the
microphone.
CALLER (Caller Display)
PAUSE button
Press to display details of
people who have called you.
Press to generate
pauses when using
the phone on a
PBX.
OK button
Press during programming
to confirm your selections.
Press and hold to switch the
handset off.
HANDSET LOCATOR
button
Press this to make the
handset ring, if you can’t
remember where you put it.
Press it again to stop the
handset ringing.
PHONE button
Press to begin, answer and
end a telephone call.
Before you can use the handset to make calls
you will need to fit and fully charge the
batteries, as described on pages 4 and 5.
Please read the notes on pages 2 and 3
before you install the base unit.
MEMORY button
Press to make calls to
numbers stored in memory
MENU button
Press to start and end
the programming
menu.
EXT
INT
micro
This shows the handset’s name.
When you dial a phone number, it is
shown here. After 15 seconds, the
call’s duration is shown.
Left arrow
The number you’ve dialled has more than 12 digits, and
the display is scrolling to show the most recent ones.
EXT
Outside call
You are connected to the telephone line — your handset is ‘off-
hook’. The
flashes, without the phone symbol, while your
handset is ringing for an incoming call.
EXT
INT
Intercom call
You are connected on an intercom call. The flashes,
without the phone symbol, when the HANDSET LOCATOR
button on the base unit is pressed.
INT
Programming You are programming the handset or base unit.
Phone book You have pressed the button to make a call to a
stored number.
MEMORY
Lock
Your handset’s keypad is locked.
Mute
Your handset’s microphone is muted.
Speakerphone Your handset’s loudspeaker is on.
Messages
You have received new Caller Display messages.
Signal level
Shows the strength of the signal between the handset and base
unit, and
.
.
flashes when you are out of range of the base unit If
the level is low, or the symbol is flashing, move closer to the
base unit
Battery
charge level
Whenever this shows ‘nearly empty’ ( ), put the handset on
the base unit to charge the batteries.
, the level shown will keep changing.
While the battery is being
charged
What the symbols mean
Display messages and symbols
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:20:54
Color profile: Generic CMYK printer profile
Composite Default screen