To set dial mode (Only for models with a TONE /PULSE option)
1. Press
"PHONEBOOK"
à
2. Press
à
twice
"BS SETTINGS"
3. Press
à
"DELETE HS"
4. Press
once
à
"DIAL MODE"
5. Press
à
"TONE" (this is the default setting)
or
6. Press
to select TONE or PULSE
7. Press
to confirm your selection
To set flash time
1. Press
"PHONEBOOK"
à
2. Press
à
Twice
"BS SETTINGS"
3. Press
à
"DELETE HS"
4. Press
Twice
à
"FLASH TIME"
5. Press
to show the current setting of the Flash time.
or
6. Press
to display the flash time you want .
7. Press
to confirm your selection
Press
to go back to idle mode at any time
*
Press
to go back to idle mode at any time
*
OK
OK
OK
OK
OK
OK
OK
OK
The Recall (also called Flash) may be needed if you use BT calling functions or are
connected to a PABX.
The default setting of this BB3200 telephone is 100ms, and normally this will be correct
However, if necessary, you can select from 3 flash times: 100ms, 300ms and 600ms
for the UK.
(options may vary) to meet your telephone line or PABX requirement.
The default setting of this BB3200 telephone is TONE (also called Touch Tone,MF or DTMF),
and normally this will be correct for the
changed.
However, for some old telephone lines or PABX systems you may need to change the dialling
mode from Tone to Pulse.
24
12. BASE BASIC SETTING FROM THE HANDSET
You can set some of the basic base
functions from the cordless handset.
The base must be powered up and in idle mode, otherwise you will hear an error tone when
you try to access the "BS SETTING" menu.
UK so will not need to be
