the display will show
"MUTE" .
Muting the mouthpiece
1. Press " " to mute the mouthpiece
While the mouthpiece is muted the person on the other end of the call
can not hear you and
2. Press " " again to un-mute the mouthpiece,
and the handset shows "LINE IN USE"
You can store up to 150 numbers in each handset’s Phone Book (memory). Each
number
can have up to 20 digits, and you can store a name of up to 12 characters
with the number.
(If you try to store more, the handset will give a brief warning tone and the extra letter/
number will not be saved in memory.)
6. Phone Book/(Memory dialing)
OK
OK
Also, you can select a different ringer melody for each entry
subscribe to CID (see page 14).
Making calls from CID list
1.
In idle mode, press
or to enter the CID list, and then scroll or until you see
2. Press
, the
number which you have selected automatically dials out and the
display
show
s
"LINE IN USE"
.
Making calls from the redial list
to view the redial list
or
until you see the name and /or number of the person you want to call, then press
automatically dials out and the display shows
"LINE IN USE"
.
To answer a call
1. When the handset rings:
Press
2. When you have finished the call, press
unit or charge
pod
.
a
nd display show
s
"LINE IN USE"
the name and/or number of the person you want to call.
RD
/P
briefly
or place the handset back on the base
Binatone Help Line - 0845 345 9677
9
1. Press
2. Scroll
the number which you have selected
You can locate the handset by pressing <PAGE> on the base station. All the handsets
registered to the base will produce the paging tone and show
<TALK OFF> /<C> on any handset or <PAGE>
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
"PAGING" on the display. You
Find the Handset
How to enter characters ?
To enter characters you press the button where you
see the character e.g. if you want to insert the letter
‘
A
’
you press
, if you want to insert the letter
B
twice and for
"C"
, three times etc. If you want to insert,
for the first "A" to stop
flashing then insert the second
for
a space, or see
to delete single characters and press
to delete the whole text.
once
"A".
Press
‘
’
‘
AA
’
then you will have to wait
can stop the paging by pressing <TALKON>/
on the base again.
but this will only work if you
the key pad table overleaf for other characters. Press
and hold
