Switching handset power on and off
To switch the handset off (in case you need save battery power):
Press the
"Power on/off "
button and hold it for
3 seconds
To switch the handset back on:
Notes
to link to
the base unit.
Make sure mains power to the base unit stays switched on. The
BB3200 cordless handset
needs the mains power for the base unit to be turned on to be able to make or
receive calls.
When
the handset
is switched off, it can’t be used for making calls
including
emergency calls.
When the handset is switched off, it won’t ring for incoming calls
.
To answer a call when the handset
is switched off , you need to switch it back on.
link
with the base unit.
If the batteries have become completely run down (or if handset
is switched off)
and you place the handset in the
base unit or charge cradle it may take about 5
The handset display will go blank.
Press the "Power on/off
"
button and hold it for
3 seconds
or replace
the handset on
The handset display will turn back on.
"BASE 1"
will flash briefly,
Remember that it
may take a few moments for the handset to re-establish a radio
minutes to
link with the base unit. If you lift
the handset during this time, it will try
!
n
2).
the
base unit or charge pod.
n
Notes:
4. Handset basic settings
be a musical chime, and the handset display will go to dle mode.
while the handset searches for the base. When the handset links with the base, there will
To lock the keypad:
Press and hold the button for about 2
seconds.
Y
ou will hear a beep tone , the icon
will appear on the top of display,
"HS LOCKED"will
flash
briefly.
While
the keypad
is locked, if you
press any buttons, the handset will give you
a double warning tone, and
"HS LOCKED" will flash briefly on the display.
To unlock the keypad:
Press and hold the button for about
2 seconds.
Y
ou will hear a beep tone , the icon
will disappear from
the display and it will go back to
idle mode
.
6
1).
