Binatone AQUAREL XDC1520, Instruction Manual

Page: 14 / 130

14
3. By pressing the key buttons [8] , enter the name. Then press the button [5] .
Note: There are letters written on key buttons which you may use. By
pressing several times on the same button you may select the required
letter. In order to enter special symbols, for example, brackets press 0
or
an appropriate number of times. In order to enter the next
letter or symbol, press or wait for 2 seconds. In order to delete a
symbol or a letter, press DELETE [4] . In order to move the cursor,
use the button [5] .
4. If necessary, edit the telephone number. Then press the button [5] .
5. By pressing the or button [5] , select the melody.
Note: The melody selection function can be used if your network supports
the Caller ID function.
6. Press the Save button [3] . The telephone will return to the standby mode.
Quick dial
With the telephone in the standby mode, press and hold the button which
corresponds to the required number. (See the Phone book section to enter the
number for quick dial).
Ending calls
To terminate the call, press the Off button [7] or put the handset [1] back on the
base unit [15] .
Answer calls
To answer a call, simply press the Talk button [6] .
Redialing
The telephone stores the 10 last dialed numbers of not more than 20 figures
long. If you have several handsets registered on the same base unit, then each
handset will store own numbers.