Binatone AQUAREL XDC1520, Instruction Manual

Page: 16 / 130

16
Muting your conversation
During the conversation you may switch off the microphone. The caller will not
hear you in this case.
1. Press the Microphone Off button
[4] to switch the microphone off.
2. Press the Microphone On button [4] to switch the microphone on.
Flash Function
This function is usually applied in office PBX or when using additional capabilities
provided by the network operator. Most often, the Flash function is used to transfer
a call within office PBX systems.
To enjoy the Flash function, simply press the F button [6] during conversation .
PHONE BOOK
The phone book of your telephone consists of two lists.
The general list comprises 20 numbers. These numbers are entered into the
base unit’s memory, thus all handsets registered to the base unit have access to this
list.
The protected list comprises 100 numbers. These numbers are entered into the
handset‘s memory. If the base unit has several registered handsets, then each
handset will have its own protected list.
The length of each entry should not exceed 10 symbols and 20 digits.
Storing a number into the phone book
1. With the telephone in the standby mode, press the Phone Book button [ 4] .
2. By pressing the or button [5] , select the required list. You may choose
between the Protected or General list.
3. Press OK [3] to confirm.
4. By pressing the button [5], select the NEW ENTRY menu item; then press OK
[3] .
Note: If the telephone memory is full, then the LCD display
[2]
will show
the appropriate text, and the telephone will be transferred onto the
standby mode.