![BIMG Metvisa CLMC.510 Instruction Manual Download Page 4](http://html.mh-extra.com/html/bimg/metvisa-clmc-510/metvisa-clmc-510_instruction-manual_2752074004.webp)
4
1. Safety Information
1.1 General Warnings
• Cautions / precautions must be observed when installing, using, maintaining and discontinuing use
of this equipment;
• Before carrying out any operation (assembly, use (use), maintenance and reuse after prolonged use
of the equipment), read the manual carefully;
• The machine must be used by trained personnel familiar with the use and safety regulations
described in this manual;
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capacities, or people with lack of experience and knowledge, unless they have received
instructions regarding the use of the appliance or are under the supervision of a person responsible
for their safety.
• It is recommended that children be supervised to ensure that they are not playing with the
equipment;
• In case of rotation of the personnel that will work with the equipment, the new operator must be
educated about the standards and the operation of the same one;
• The operator must use the
Adequate PPE
(equipment for individual safety). As for example: use
cap to the hair avoiding that they lock in the moving parts of the machine;
• The operator must always be aware of situations that can cause a risk of accidents and avoid them.
For example: avoid working with sleeves of loose uniforms, where they can lock in moving parts,
causing accidents;
• After reading and clarifying all doubts, this manual should be carefully stored in an easily accessible
location, known to all persons who will operate the machine and make it available to those who will
carry out maintenance for any inquiries. Whenever any questions arise, be sure to check the manual.
Do not operate the machine in any way with doubts;
• In the installation, it is essential to make this manual available to the professionals who will do the
same;
• Never place your hands on rolling cylinders, or on or near moving parts
;
• Before starting any cleaning and maintenance, it is essential to disconnect the equipment from the
electrical mains;
• Periodically check the condition of the cables and electrical parts;
• Do not leave the machine switched on unattended.
ATTENTION!
Do not perform repairs on your own. Refer servicing to qualified service personnel. Only use
original parts in your machine.
Summary of Contents for Metvisa CLMC.510
