BIMG Metvisa CLMC.510, Instruction Manual

Page: 19 / 32

19
5.2 Breakdown Maintenance and Procedures
The operator must be instructed to carry out routine inspections, making small adjustments,
cleaning and observing signs of breakdowns that may occur. Examples include: checking for strange
noises; loss of machine power; the non-execution by the machine to the proposed service; among
others. Actions like these are indispensable to guarantee a longer machine life.
ATTENTION!
When maintenance occurs (even small adjusts) disconnect the equipment from the electrical
mains.
It is recommended that each 6 months be made preventive maintenance, checking and
adjusting the loose, cleaning the internal parts, and others. Detecting broke parts or without the
correct functionality the worker needs to exchange the parts, always using original parts only.
By carrying out preventive maintenance, the inconvenience of having the machine stopped
when it is most needed is eliminated, the cost of maintenance is reduced and the risk of accidents is
reduced.
ATTENTION!
The preventive maintenance must be made by a capacity person.
Make sure that the equipment be disconnected from the electrical mains.
Always that some item referred to safety be removed from the equipment (for example, for
cleaning or maintenance), replace it in place and confirm that it is performing its function
correctly.
Detecting broke parts or without the correct functionality, please contact the nearest
authorized service center.
5.3 Prolonged Interruption in Use of Equipment
When leaving the appliance unattended for an extended period of time, unplug it from the
mains, keep the oven door open, and perform a thorough cleaning, including the various accessories.
It is advisable to protect all parts of the equipment with white vasoline or with suitable commercially 23
available products. You should also protect the equipment from dust by covering it with a nylon or
other material.