BIMG Metvisa CLMC.510, Instruction Manual

Page: 14 / 32

14
ATTENTION!
The power mains of the machine for 110 V requires a circuit breaker with 30 A and for 220 V
a circuit breaker with 15 A.
In case of need some maintenance in the power cable and/or in the power plugs of this
equipment this procedure must be carried out by an authorized agent or qualified person. These
people, when reassembling these components and make the connections of the points, can also use
the marks on the inside of the plug, in its plastic region as reference.
These marks, the grounding pin (ground pin) is indicated with the grounding symbol, the
phase conduction pin has the symbol “L\+”, and the pin without mark is the neutral conductor. Check
the following picture:
For more details about the rest of the electrical part of the equipment, check the Electrical
Schematic in the annexes of the manual.