382506_A_HI
17
Maintenance
REPLACING THE BELT CONTINUED
2.4 Finally, tighten the bolt in the center hole to shift the mounting plate forward. See Figure Q. At this stage,
your machine should appear as shown in Figure R.
Figure Q
Figure R
3. Remove worn/broken belt. Take the belt loose from the engine pulley and idler pulley. Then pull up on the
handle of the tine crank mounting plate as shown in Figure S. You may need to rotate the crank mounting plate
forward and backward to completely clear the belt. Gently pull the old belt off the tine crank pulley and feed out of
machine. See Figure T.
Figure T
Figure S
NOT
FOR
REPRODUCTION
