382506_A_HI
13
Maintenance
ADJUSTING CHAIN TENSION
Note:
Text “PLUG” to 33988 for a helpful video tutorial about adjusting the chain tension on your aerator.
Note:
If possible, lift up the rear of the machine for easier access to undercarriage during this procedure.
1. Remove the bolts holding shield into place. Use an impact/socket wrench fitted with a 1/2” socket to remove
the three bolts which secure the shield. For ease, remove each bolt in the following “ABC” order.
Note:
Pictures
are of operator’s righthand side shield.
A. The first bolt is circled in orange. See Figure G.
B. The placement of the second bolt is circled in blue. See Figure H. (Note that in Figure H the bolt has already
been removed).
C. The third bolt is circled in yellow. See Figure G.
Figure G
Figure H
NOT
FOR
REPRODUCTION
