382506_A_HI
10
Maintenance
SWING ARM BUSHING REPLACEMENT
1. Disconnect the lift link from swing arm support bar. Use an impact/socket wrench fitted with a 3/4” socket
to remove the 1/2” bolt (see Figure A, circled in yellow). Set hardware aside to be reattached later.
2. Detach the swing arm support bar. Use an impact/socket wrench fitted with a 1/2” socket to remove the
four 5/16” bolts and associated hardware (see Figure A, circled in orange). Set hardware aside to be reat
-
tached later. Remove the swing arm support bar. At this stage, your machine should appear as in Figure B.
Figure A
Figure B
NOT
FOR
REPRODUCTION
