382506_A_HI
23
Maintenance
ADJUSTING THE AUTO-ENGAGE CABLE
1. If the tines on your aerator do not drop with ease when the clutch lever is engaged, you may need to adjust
the auto-engage cable. Locate the cable on your machine as shown in Figure AH. The auto-engage cable is
circled in red.
Figure AH
2. Simultaneously use two 1/2” wrenches to loosen the two lock nuts which secure the auto-engage cable.
See Figure A
I
.
Figure A
I
3. The cable should now be loose enough to move in the vertical direction. Gently pull down on the cable to
allow tines to drop with ease.
4. Reverse Step 2 to tighten the lock nuts and secure the cable back in place.
NOT
FOR
REPRODUCTION
