Billow S50VK, User Manual

Page: 29 / 102

EN
Before using your phone, install the SIM card.
The SIM tray is located at the top of the housing of the phone
battery. Remove the housing by pulling from the bottom right
slot up.
Insert your Micro SIM card in the SIM 1 slot.
If you have another micro SIM card, please insert It in the SIM 2 slot.
The Micro SD card slot is on the left of the SIM 2.Insert the battery carefully,
taking into account the direction of the pins and battery orientation.
Insert the battery carefully, taking into account the direction
of the pins and battery orientation. (Note the position and the
marks next to the slot).
Charging the battery
This phone uses a rechargeable battery.
For a first use fully charge the battery for at least 6h.
With normal use of the device, the battery indicator will warn you
when the battery is low. Proceed to load. Plug the charger into a
free power outlet and the end of the micro USB cable in the Micro
USB port of the phone. The charging indicator is displayed on the
screen and indicates the phone is charging.
After the charge is complete, disconnect the charger from the
phone. CAUTION : The phone battery must not be removed
during charging.