Billion BiPAC 8900X R3, User Manual, Page: 17 / 261

12
Cabling
One of the most common causes of problems is bad cabling or DSL line(s). Make sure that all
connected devices are turned on. On the front panel of your router is a bank of LEDs. Verify that the
LAN Link and DSL line LEDs are all lit. If they are not, verify if you are using the proper cables.
If the
error persists, you may have a hardware problem. In this case, you should contact technical support.
Make sure you have a line filter with all devices (e.g. telephones, fax machines, analogue modems)
connected to the same telephone line and the wall socket (unless you are using a Central Splitter or
Central Filter installed by a qualified and licensed electrician), and ensure that all line filters are
correctly installed and the right way around. Missing line filters or line filters installed the wrong way
around can cause problems with your DSL connection, including causing frequent disconnections. If
you have a back-to-base alarm system you should contact your security provider for a technician to
make any necessary changes.