manualshive.com logo in svg

Billion BiPAC 8800AXL, User Manual

Share
Download
Billion BiPAC 8800AXL User Manual Download Page 196

192

 

Dynamic DNS 

 

The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing 
users whose ISP does not assign them a static IP address to use a domain name. This is especially 
useful for hosting servers via your ADSL connection, so that anyone wishing to connect to you may 
use your domain name, rather than having to use your dynamic IP address, which changes from 
time to time. This dynamic IP address is the WAN IP address of the router, which is assigned to you 
by your ISP. 

Here users can register different WAN interfaces with different DNS(es).  

 

 

Click 

Add

 to register a WAN interface with the exact DNS. 

 

You will first need to register and establish an account with the Dynamic DNS provider using their 

website, for example 

http://www.dyndns.org/

 

Dynamic DNS Server: 

Select the DDNS service you have established an account with. 

Host Name, Username and Password: 

Enter your registered domain name and your username 

and password for this service. 

Selected WAN Interface: 

Select the Interface that is bound to the registered Domain name. 

 

 

Summary of Contents for BiPAC 8800AXL







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands