Billion BiPAC 8800AXL User Manual Download Page 194

Page: 194 / 230

190

DNS

DNS, Domain Name System, is a distributed database of TCP/IP application. DNS provides
translation of Domain name to IP.

DNS



IPv4

Three ways to set an IPv4 DNS server



Select DNS server from available WAN interfaces:

Select a desirable WAN interface as the

IPv4 DNS server.



User the following Static DNS IP address:

To specify DNS server manually by entering your

primary and secondary DNS server addresses.



Use the IP address provided by Parental Control Provider:

If user registers and gets an

DNS account in the parental control provider website, expecting to enjoy a more reliable and
safer internet surfing environment, please select this option (need to configure at

Parental

Control Provider



IPv6:

IPv6 DNS Server’s operation is similar to IPv4 DNS server. There are two modes to get DNS server
address: Auto and Static mode.

Obtain IPv6 DNS info from a WAN interface

WAN Interface selected:

Select one configured IPv6 WAN connection from the drop-down menu to

be as an IPv6 DNS.

Use the following Static IPv6 DNS address

Summary of Contents for BiPAC 8800AXL







































































































































































































































Search results

Summary of Contents for BiPAC 8800AXL

Reviews:

Brands by name

Popular brands

Billion BiPAC 8800AXL, User Manual

Search results

Summary of Contents for BiPAC 8800AXL

Reviews:

Brands by name

Popular brands