manualshive.com logo in svg

Billion BiPAC 8200N, User Manual

Share
Download
Billion BiPAC 8200N User Manual Download Page 87

84

Backup / Restore

These functions allow you to save a backup of the current configuration of your router to a defined 

location on your PC, or to restore a previously saved configuration. This is useful if you wish to 

experiment with different settings, knowing that you have a backup in hand in case any mistakes 

occur. It is advisable that you backup your router configuration before making any changes to your 

router configuration.

Backup Configuration

Press Backup to select where on your local PC you want to store your setting file. You may also 

want to change the name of the file when saving if you wish to keep multiple backups.

Restore Configuration

Press Browse to select a file from your PC to restore. You should only restore your router setting 

that has been generated by the Backup function which is created with the current version of the 

router firmware. Settings files saved to your PC should not be manually edited in any way.

Select the settings files you wish to use, and press Restore to load the setting into the router. 

Click 

Restore to begin restoring the configuration and wait for the router to restart before performing any 

actions.

Summary of Contents for BiPAC 8200N






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands